New chain keeps the rounds rolling

When the demand for your product increases, it is desirable to be able to increase production levels to meet customer requirements; hopefully without significant increases in production costs. This requires the usual increase in raw materials; however, it is also important to ensure that the production equipment is able to accommodate the heightened productivity. For a cheese manufacturer in France, a small oversight could have been avoided if expert advice had been taken sooner.


The demand for a particular cheese product had been on the increase for a few years and the existing production process was able to meet demand. However, in order to continue satisfying the orders, it was necessary to increase the size of the individual cheese rounds from 60kg up to 90kg. While all of the production processes could be modified to accommodate this change, the conveyor system used to transport the cheese rounds was overlooked.

Increasing the loading on a roller conveyor by 50% places a huge demand on the chain drive system and in this case it was too much. After just a few months of this increased production output, the conveyor chain broke, which led to unnecessary loss of production. While a direct replacement chain was installed in the short term, the cheese manufacturer contacted Tsubaki, one of the world's leading manufacturers of premium quality chain products, to provide a long term, reliable, solution.

The initial site investigation established the failure mode of the chain, which became apparent when the production history was revealed. It also highlighted the need for regular wash down procedures, which meant that the new chain specification would have to include excellent corrosion protection. The proposal from Tsubaki was to use New Environmental Plating (N.E.P.) chain which would offer increased load capacity against stainless steel chain while still providing the necessary resistance to corrosion.

TSU220 NEP chain.tif

                                                                                                                               * N.E.P. chain

N.E.P. chain retains the same strength as carbon steel chain, but, in addition, has undergone a special surface treatment process. The link plates, bushes and bearing pins of the chain have a special three-stage coating applied in order to provide the maximum protection from the operating or environmental conditions. In addition, the chain rollers have a special coating designed to resist corrosive conditions and the severe dynamic contact between roller and sprocket.

Once installed, the Tsubaki product has continued to provide reliable service, enabling the cheese production to continue unhindered. The annual maintenance shutdown at the factory allows the chain to be inspected, with no signs of wear due to corrosion or loading to be found.

– 2014 August 29